Alabama · modelled at Huntsville

Solar water pumps in Alabama

Alabama averages 4.89 peak sun hours a day across the year, 21st of 51. The darkest month, Dec, gives 3.16 (19th of 51 for winter sun); the brightest, Jun, gives 6.04. A pump that has to fill a trough in Dec needs 1.9 times the panels of one that only runs in Jun.

By the editors of SolarPoweredWaterPumps.comLast reviewed October 2026

Peak sun hours by month

3.6

Jan

4.0

Feb

4.9

Mar

5.9

Apr

6.0

May

6.0

Jun

5.7

Jul

5.5

Aug

5.0

Sep

4.8

Oct

4.1

Nov

3.2

Dec

kWh per square metre per day on a south-facing panel at 20 degrees in Huntsville (34.73, -86.59). Source: NREL NSRDB via PVGIS v5.2.

Worked sizing for Alabama

The same two systems are worked for every state so you can compare. Both use 35% or 30% wire-to-water efficiency and a 0.75 array factor; change any input in the calculator.

System	Design sun	Flow	TDH	Pump input	Panels	Tank
20 beef cattle, year-round (80 ft lift, 10 ft rise, 300 ft of 1 in poly)	3.16 h	2.11 gpm	91 ft	104 W	140 W	1,200 gal
Same well, grazing season April to October only	4.83 h	1.38 gpm	91 ft	67 W	90 W	1,200 gal
1,000 sq ft garden in summer, from a pond (8 ft suction, 15 ft rise, 200 ft of 3/4 in poly)	5.76 h	0.26 gpm	23 ft	4 W	10 W	267 gal

Panel figures are the floor from the arithmetic. Real systems usually carry 1.5 to 3 times this so the pump sits in the middle of its curve and the tank refills after cloudy days.

Run your own numbers. The sizing calculator shows every step, for your state, lift and pipe.

Open the calculator

What this means in Alabama

Alabama has moderate winter sun. Size year-round systems on Dec's 3.2 hours and carry at least three days of storage; summer-only systems can be much smaller.

Related reading: winterizing, livestock watering and USDA cost share.

Sources